Category Archives: RiteWings

Section for all posts on the Chris Klick designed Ritewings

Customer Review – IYF44 built by KiwiRC

Posted on June 16, 2010 by Administrator

Heres the original article at www.parkflyers.org.nz and I have re-printed it below Not so long ago I bought an IYF off Mat from KiwiRC (matwelli on the forum). I took up his free build offer because my building skills are … Continue reading →

Posted in RiteWings | Tagged , , | Leave a comment  

Demon Lite 40 CG location

Posted on June 16, 2010 by Administrator

Ritewing DemonLite 40″ CG location – thanks to Jacko Click here to open the CG calc preloaded with the Demon Lite 40″ settings

Posted in RiteWings | Tagged , , , , | Leave a comment  

Slope soaring in 8 km/hr and less wind

Posted on June 16, 2010 by Administrator

Heres a Video of the Jacko built Updraft 48″ (a cut down 60″) flying at Mt Wellington a week or so ago, wind speed 8kmhr or less !

Posted in RiteWings | Tagged , , , , | Leave a comment  

37.5″ Demon Ritewing Maiden

Posted on June 13, 2010 by Administrator

Well, maiden time (finally) The servos have been replaced (one failed on Jacko). Motor test run, amps are down a bit on max, mid 30′s on the 6 by 4, this motor is designed to run a 7 by 4. … Continue reading →

Posted in RiteWings | 1 Comment  

TL80 Launch Vid

Posted on May 7, 2010 by Administrator

This is how to launch an 80″ (2m) 2.45 kg, 1.4kw Ritewing ! Music is “battle without honour” Launcher is yours truly, I use this method for all may wings.

Posted in RiteWings | Tagged , | Leave a comment  

Posted on November 9, 2009 by Administrator
Posted in RiteWings | Leave a comment  

Tokoroa Flyin 25th Oct 2009

Posted on October 26, 2009 by Administrator

Together with Jacko, we had 7 RiteWings at Tokoroa for the sunday – great day lots of flying. Thank you to Bruce Simpson and all the guys at the SWMAC club, and ll the rest who travelled to Tokoroa for … Continue reading →

Posted in RiteWings | Leave a comment  

Haast Build – pics so far

Posted on October 10, 2009 by Administrator

Jacko has started the build, spars are glued in (PU – pollyurethane – Gorilla glue) and the Center section glued to the wings with 3M90

Posted in Haast Build Thread, RiteWings | Leave a comment  

RiteWing Build Tips by Jacko

Posted on September 4, 2009 by Administrator

Ritewing hints and tips #1 1 – Put everything forward!!, if powered pusher, use the lightest motor for the job – It means less nose weight & less AUW 2 – Dont worry about goop/CA for the coro bay lids, … Continue reading →

Posted in RiteWings | Leave a comment  

RiteWings in NZ user map

Posted on August 21, 2009 by Administrator

Thanks to Jacko, we have a map set up on google, please add your Ritewing location to it View The NZ Ritewing Map in a larger map

Posted in RiteWings | Leave a comment